You are currently viewing our site as a guest which gives you limited access to view most discussions, videos and photo galleries. By joining our free community you will have access to post topics, communicate privately with other users, upload videos and photos in your own photo album and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
Demoralize the enemy from within by surprise, terror, sabotage, assassination. This is the war of the future.
Make the lie big, make it simple, keep saying it, and eventually they will believe it.
Quotes from Adolf Hilter
Well to be PERFECTLY HONEST about it,I asked the pres. of Duracoat what the "going rate" was on a refinishing job and was informed BY HIM that everyone was charging between $350.00 to $700.00 per gun depending on comlexity of design...
Gary
p.s. got the email to show it.
WWW.LONEWOLFGUNSERVICES.COM
Lone Wolf Enterprises
Training & Service Center
John 3:16
So your building them as well. everyone I know charges around 100.00 bucks
All I paid for the kit was 40.00 bucks DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was designed for the average gun owner. Preheating, baking and blasting are not required. Expensive, space consuming equipment is not needed. Simply clean and degrease the surface prior to application.
I believe someone emailed you a line of bull sh*t.
Demoralize the enemy from within by surprise, terror, sabotage, assassination. This is the war of the future.
Make the lie big, make it simple, keep saying it, and eventually they will believe it.
Quotes from Adolf Hilter
I asked the owner of Duracoat and that was what he told me directly, also dsarms.com charges the same 350
got the email, as I emailed them directly for info on becoming a dealer...
so...go figure?
all I have is what I was told.
and yes you are right about its ease.
WWW.LONEWOLFGUNSERVICES.COM
Lone Wolf Enterprises
Training & Service Center
John 3:16
to any of them. It's cheaper and easier to apply. it's not as durable, but it looks cooler to have the paint wearing in some spots. Even paint looks gay.
If you can't win their hearts and minds, then expose their hearts and minds to open oxygen. WHEN IN DOUBT, THIRTY OUT!!
use high temp engine paint[the 500 degree type] spray it on, let it dry and then heat it with a heat gun[looks like a blowdryer on crack] for about 20 min. this sorta oven cures it and makes it rather durable. resists chipping fairly well[almost as well as duracote] amd is still cheap
"Guard against the impostures of pretended patriotism" -George Washington, Farewell Address, September 19, 1796
I am an arrogant bastard!I have full access to hot bluing tanks.I have a good friend who has Parkerizing tanks setup!for price info email me at greasypaws@rainierconect.com
"There is a time for all things, a time to preach and a time to pray, but those times have passed away. There is a time to fight, and that time has now come." --Peter Muhlenberg, from a Lutheran sermon read at Woodstock, Virginia, 1776
I agree John with your Cerakote choice. I have had just a K-31 coated so far but plan on others. I was impressed enough with the process that I have sent work from my employeer to have coated. This is a great coating (hard, durable, & self lubricating) and available in many colors. It's working well in my laboratory automation projects.
I've commented extensively on the benefits and detriments of all 3 on several boards.
Here's the news. Dura is good for SOME things it is NOT good for most things.
Firstly it is repackaged Sherwin Williams automotive paint, which is why it cannot handle temps over 300F.
Finite pot life. Hardener starts hardening with any exposure to UV rays. Goes on too thick for my tastes.
However I do use it for plastics and optics. Because I cannot bake them.
Moly over park will outlast most, including the vaunted Cera-crap, which has the worst of both types, it has a finite pot life AND it must be baked for hardness.
Only been doing this for 15 years. What do I know.
You must be having your period....cause one minute you tell me "Shut up I hate you cause your white" and now you say "you love me" Im very confused. But ebear is your bitch not me! I my own bitch...wait thats not right.... SEE TOLD YOU IM CONFUSED!!!!
"War is God's way of teaching Americans geography."
- Ambrose Bierce
Snaks is your new name.
You have shortened everyone elses so I shortened yours.
لن أستسلم لموتُ لالاس "I will not submit.Death to Islam!"
The Socialists told us long ago that since they could not beat us with force, that they would destroy us slowly from within. So far it is working pretty well. MOLON LABE
You damned white men just don'y understand. PMS is when we get moody. Pre-Menstrual Syndrome, as in before the bleeding. The heavy bleeding I experience is a relief from the bloating and cramps. Damn men can't get anything right. Especially the white ones. VIVA LA RAZA!!!!!
If you can't win their hearts and minds, then expose their hearts and minds to open oxygen. WHEN IN DOUBT, THIRTY OUT!!
Nitris
I have a few I need coated
LONEWOLFGUNSERVICES
Well to be PERFECTLY HONEST about it,I asked the pres. of Duracoat what the "going rate" was on a refinishing job and was informed BY HIM that everyone was charging between $350.00 to $700.00 per gun depending on comlexity of design...
Gary
p.s. got the email to show it.
Nitris
So your building them as well. everyone I know charges around 100.00 bucks
All I paid for the kit was 40.00 bucks DuraCoat is extremely easy to apply. Anyone can do it. DuraCoat was designed for the average gun owner. Preheating, baking and blasting are not required. Expensive, space consuming equipment is not needed. Simply clean and degrease the surface prior to application.
I believe someone emailed you a line of bull sh*t.
LONEWOLFGUNSERVICES
I asked the owner of Duracoat and that was what he told me directly, also dsarms.com charges the same 350
got the email, as I emailed them directly for info on becoming a dealer...
so...go figure?
all I have is what I was told.
and yes you are right about its ease.
LONEWOLFGUNSERVICES
We do not refinish at this location. A patterned rifle will go for $350 to $700 depending on the detail, mag catch, safety, scope ..etc..
Our web site is our most current catalog, printed 4-color brochure do not show the slight differences in colors.
Thank you
Anthony G. Houts
Mosinfreak
to duracote. i know you have to bake it but i have found the finish is more durable and resistant to chipping
runawaygun762
to any of them. It's cheaper and easier to apply. it's not as durable, but it looks cooler to have the paint wearing in some spots. Even paint looks gay.
Mosinfreak
use high temp engine paint[the 500 degree type] spray it on, let it dry and then heat it with a heat gun[looks like a blowdryer on crack] for about 20 min. this sorta oven cures it and makes it rather durable. resists chipping fairly well[almost as well as duracote] amd is still cheap
greasypaws
I am an arrogant bastard!I have full access to hot bluing tanks.I have a good friend who has Parkerizing tanks setup!for price info email me at greasypaws@rainierconect.com
JohnnieBravo
I just had a melt job and Cerakote dont to my P250 and it ran me $120.00
LONEWOLFGUNSERVICES
THATS WHY I was askin' gents.
cbxjeff
I agree John with your Cerakote choice. I have had just a K-31 coated so far but plan on others. I was impressed enough with the process that I have sent work from my employeer to have coated. This is a great coating (hard, durable, & self lubricating) and available in many colors. It's working well in my laboratory automation projects.
AZEX
I've commented extensively on the benefits and detriments of all 3 on several boards.
Here's the news. Dura is good for SOME things it is NOT good for most things.
Firstly it is repackaged Sherwin Williams automotive paint, which is why it cannot handle temps over 300F.
Finite pot life. Hardener starts hardening with any exposure to UV rays. Goes on too thick for my tastes.
However I do use it for plastics and optics. Because I cannot bake them.
Moly over park will outlast most, including the vaunted Cera-crap, which has the worst of both types, it has a finite pot life AND it must be baked for hardness.
Only been doing this for 15 years. What do I know.
D.
runawaygun762
as Krylon paint. But what do i know. I've only been doing it for-well, not that long. One gun, in fact. Ah well. At least I'm not Polish.
Reaper308
your bushmaster looks like snake took some crayons to it
runawaygun762
I stayed inside the lines mostly. Snake couldn't hope to do that. I love you, white boy.
Snake
You must be having your period....cause one minute you tell me "Shut up I hate you cause your white" and now you say "you love me" Im very confused. But ebear is your bitch not me! I my own bitch...wait thats not right.... SEE TOLD YOU IM CONFUSED!!!!
samD
Snaks is your new name.
You have shortened everyone elses so I shortened yours.
Snake
my shorten name is SS.
runawaygun762
You damned white men just don'y understand. PMS is when we get moody. Pre-Menstrual Syndrome, as in before the bleeding. The heavy bleeding I experience is a relief from the bloating and cramps. Damn men can't get anything right. Especially the white ones. VIVA LA RAZA!!!!!
Snake
........